Problem countered during competition.


During the competition, what we expected was wrong.  The robot is not working as we planned because the sensor become very sensitive and not follow as our plan. and the voltage supply cannot supply as a requirement for the circuit. As can be seen in the video below, the robot move slow and doesn't follow the track correctly.


Part 1

Part 2

Part 3

Part 4

Comments

Post a Comment

Popular posts from this blog

IC Selection

Image
We have done some reseacrh regarding IC selection on which one should we choose between AT89C52 or AT89S52. During our simulation we used AT89C52 and 8052. We have observed the power consumption and connection port between these IC and other configuration.  AT89S52 The 89S52 has 4 different ports, each one having 8 Input/output lines providing a total of 32 I/O lines. Those ports can be used to output DATA and orders do other devices, or to read the state of a sensor, or a switch. Most of the ports of the 89S52 have 'dual function' meaning that they can be used for two different functions. The first one is to perform input/output operations and the second one is used to implement special features of the micro controller like counting external pulses, interrupting the execution of the program according to external events, performing serial data transfer or connecting the chip to a computer to update the software. Each port has 8 pins, and will be treated from...
Read more